Search results

You can simply relocate your U9 before you trim. If it still powers on, your relocation was successful and you can start trimming.

PM me

I'm looking to sell this 7" screen I bought a while ago on ebay. It has built in audio with volume control, and accepts HDMI, VGA, and composite. The picture is very nice imo, I used to use it with my xbox. I have the power adapter and the 3.5mm to AV adapter, but not the micro usb to VGA...

Only one is included, unfortunately. I messaged the seller this morning

Modder420 delivering quality memes as usual

What Ginger said, though if you already have the screen and REALLY want to do an RGB mod you can, but you have to have the right model n64 board and would need some resistors, ceramic capacitors, and a 3 channel amp chip. Info here...

Yes, he said his design would have worked so much better for a wii portable than a gamecube portable, which is why he had to add a spacer. So after a bit of modification, this is the result. He was definitely right since no spacer was needed this time around :)

There’s a brief glimpse of the back of the system in the video. I 3D printed an L, an R, and two Z buttons and placed them on the back. They work well and are quite comfortable that way

After a year of work and almost entirely frying the system, I've finally fixed all of the issues and completed my first Wii portable. I've decided to respectfully plagiarize @Gman by calling it the WiiBoy "XL" as it is the only name that suits it.. Specs: - OMGWTF trimmed Wii motherboard - Four...

Replacing the screen with a backlit screen has been extremely well documented, and is thus a very easy mod to do. You need to obtain an AGS-101 screen, the types in the latest model of the GBA SP, which you can either take from an SP or but an individual screen from ebay. You also need a 32 or...

Wait a minute since when did LovableChevy have a forum

I confess I didn't read bb rules either shoot me now pls

no

Awesome! Too bad this wasn't released earlier XD

Yeah, I'm using the dual tact mod, but they're not wired to the GC+ yet. So will it randomly click the L/R just on the homescreen or also during games?

I'm using the configurator from the GC+ documentation page. It honestly sounds like the last thing that could affect the GC+, but I repeated the exact same process 4 times, 2 of which I clicked "exit to launcher." Those two times were the only times it did the infinite freeze EDIT: also, the...

Small update on this: I reopened the controller config just for testing and did the ranges again. The only thing I did differently is clicked "exit to launcher" after the ranges were saved. This is what I did with the first GC+. Sure enough, it got stuck on the infinite loading this time, just...

Mine says 1.0 on it but is green

Oh! I had thought I could just go back and set the range later as long as I have the main stick's range set. Well I guess that was a more important detail than I thought.. Thanks for the help!