Search results

I see the problem here: you have the reset pad soldered to ground. It should be connected to the N.O. (normally open) contact on your push button. When you press the button, the reset pad should make contact with ground. Additionally, you have both contacts of the push button tied to ground. One...

Yes pics will help.

Do you mean the lid switch? When there is no lid switch you can skip that step (cutting the trace). Can you explain "not getting power" more, please? If you mean you cannot power it on. You need to ground the reset pad with a pb. Read up on this thread it's covered a few times with some...

@Customledmods Make us proud...

Save us Customledmods, you're our only hope! @Customledmods if you fix it can you share with us wha tthe problem was, I am really curious!?

yeah, I'm really happy with them!

@Legend , @Customledmods , @Mister M Lookey what you guys done went and made me do!! Ha! I am now on my way to fixining these 79k boards 'cuz now I gots voltage boards and board scans. Thanks guys!!! not bad on price from PCBWay, it worked out to be $3.15 per board.

What cards did you try, which failed. I have only been using the Samsung cards that Tito recomends. Thanks for your help!

I had an issue with a 79k recently where the 5V regulator was getting really hot (circled in the pic). This happened after the board was trimmed, and I had powered it on for a while during testing of the MX4SIO and ModBo install. Everything was working, and I didn’t notice anything until the fan...

Thank you! Correct me if I'm wrong, but we could use this on all those PS2 consoles with the power issue (red light to green light back to red, or just a red light). I'm thinking it would be easier to get those consoles up and running by using a regulator board like this one. The power is...

@DoeKe Thank you for that information! I have been wanting to add threaded inserts to my resin shells but was hesitant to do so. Another thing I about the resin shells is that they are easily dissolved by IPA. I was working on the board and spilled some IPA on my work mat, and the shell...

@Mister M Thank you! Your board scans are pretty helpful too.

@Customledmods Thank you for your work on this! I am currently building your board as well as Legend's. I got a bit confused about which project I was working on because I had purchased the parts for your board a while ago. Unfortunately, I didn’t bookmark the thread. When I returned to...

@Legend I got the components from DigiKey and am now working on getting a board made. Thank you so much for your work on this! This will be super helpful for troubleshooting, and I’m also interested in building a really small console. Holy cow, this stuff is so much fun, and I’m only playing...

I agree with Legend on this. I have 3–4 boards I got from eBay that were DOA, and all of them have good fuses. They’re not easy to troubleshoot because when they fail the power-on cycle, they just turn back off again. You either get the "Red to Green to Red" sequence or just the red light with...

@dawid90u Yes, what he said! Doeke started a thread about PS2 power problems here: Power issues on two boards. @Legend I'm finally getting around to building your power board. Thank you, thank you, thank you for your work on that!!! I got confused, sorry, I am building Legend's PS2 PSU...

The button and micro SD card adapter files are included with the original post by Wesk (the very beginning of this thread).

That’s awesome you got it to work! Nice! When I get a chance, I’m going to load up the version you posted and play around with it. It really should be as simple as formatting the microSD in exFAT, dropping your ISOs in the DVD folder, configuring OPL, and you’re done! I’ll have to do it using...

@DoeKe Now it's making sense as to what was going on. Ha! I think you've got it now. Another thing to note is that the MX4SIO doesn't always show up right away on that version of OPL because the default is USB. You have to use the D-pad to select the next location. Format your microSD card as...

In OPL under "About" what version is listed at the top? Mine is "Open PS2 Loader v1.2.0-Beta-1991-CCV2-G" Build Options: GSM 0.40 - IGS 0.1