thanks,but I still don't know if it works(I made sure to put tape over it so you know)
A hack saw carefully
I used a saw
got it,I probably have to use pliers since I have a hot air station or dremel(I think)
Thanks I'll probably order it soon I just wasn't sure
You'll want to get rid of that inductor you cut around before you try to boot it btw, it's not good to leave it there.
The inducer is the black...
Thanks a lot! And I'll try to update the document link so that no permission is needed
and I just checked and it's 100% a 4 layer...
Really! I just assumed it was a 6 layer since their more common and it didn't seem like the people I bought it from had it for a long time
So I accidentally bought 22 awg wires(for ground) when the wires a material list told me to get was 22 gaug would this work because if so would it...
If you just want to play wii u games on the go your best bet would probably be getting a gpd win 2 and installing cemu on it as it runs it pretty...
would https://oshpark.com/shared_projects/Wy4lnqzu also work
something simulators happening to me with USB loader and I think it might be the wii's fault(not configured correctly with pimp my wii) whatever...
and from my research the USB adapters don't do anything in terms of storage so you couldn't install portablizemii correct?
https://oshpark.com/shared_projects/Wy4lnqzu might work too
maybe theirs a way to connect a SD card slot or USB adapter to it
Since this is my first ever portable I'm basing my first model after the louii since it has the 3D printer files and parts list(also I don't have...
this is all I know
in terms of materials and where to wire it.Thanks you helped alot
building first portable
Separate names with a comma.