well i messed with U10 and now it is not lighting the screen at all. I have double checked the solder point for U10 it looks good. not sure what...
ok, so now I am getting a blank screen. it's like it sees the Wii but is displaying no image. Any idea what it could be?
I count 10 pins on the nand, and then the 4 pins for the 3.3 reg on the other side, that need to be found. I have already said the nand does not...
I fully understand your point about not wanting to share the info, because of the issues it will cause. But like @Nold I don't want to spend...
well really just because I wanted to, it's an extra board, that i got greedy on and messed up pulling up traces and stuff. doing a rewire on the...
Where do the parts in red get moved to? I don't see a guide on here about where to move it to. And the people that have done it. have not...
So i started on a Wii board that i cut a little to close to. Can someone point me to what I do with the components on the top side? Looking at...
on the Audio/video it says... "You can either connect your primary voltage input to the 12vpins on the audio preamp, or use the alternate audio...
On the bluetooth, if it is missing the top pins for ground, you just don't worry about those right? just use the ground on the bottom pins? Thanks
Can anyone tell me why i would not be able to sync the Wii remote to the board after bluetooth has been installed? I have hit the sync button on...
ok another question. The caps that are at the bottom on the Wii, Are those able to be removed? If they are removed, do I loose something?
@cheese here is where it dies. EDIT..... your file fixed it thanks [IMG]
it does it after I click the + sign, and it makes it about half way down on the screen, it flashes so quick I can't see what it is. I have redone...
can anyone tell me why my Wii is doing this when running the cheese installer? [IMG]
Pretty sure I know what is wrong with the board. So I have another one coming. I need to slow down and take it easy. You can't be ruff with...
[IMG] [IMG] close up of bluetooth lines. I had a heck of a time getting those wires on those locations this time, not sure why. Usually very...
yes, both grounds are connected, and busted Capacitor was removed. [IMG]
If i attach a wire from any other point then that one I have circled, I get no Video. That one spot is the only one where I can get video out....
Can anyone tell me why I can get Composite Video working if I hook up to the top - bottom - left? Pic below circled in red where it works. But not...
ok, so the board is cut. and the 1.5v line is shorted out. I had the crap taped out of it, no way anything got under the GPU/CPU. Not sure what...
Separate names with a comma.