Problem solved! Thanks Aurelio:D
I have successfully installed Gc+ board in my portable, but I have one problem with the dual tact mod.
Whenever I press the left analog tact, it...
Thank you. I think that’s what I’m go to do.
I tried rewiring, and broke my trimmed gc controller somehow. No response whatsoever from it. Looks like I have to take apart and rewire the...
The 10k resistor is connected to the analog data line and not the 3.3v line if that makes a difference.
I am using a cut up gc controller and the dual tact mod.
I have 10k resistors for the squishy tacts connected.
Whenever I press the squishy tact...
After a year of work, my portable Wii is finally finished.:D
Massive thanks to this community who provided custom software and answered my stupid...
Got it to work, thanks.
Thank you so much. What type of capacitor, electrolytic? What rating should I get also?
I have just finished my portable and whenever I plug in headphones using the switching headphone jack, they heat up. Within a minute they are...
This should answer all of your questions.
This one is used by a lot of people, myself...
I figured it out!!! I was a genius and forgot to connect the grounds together.:XD: It's working now.
With 3.3v connected to the board:
Without 3.3v connected to the board:
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
The 2 points circled in red are connected. Is that my problem? I've already sanded my board a TON with 2000...
I sanded a lot, and the problem still persists. It is still the 3.3v that causes the issue. There are no shorts between 3.3v and 1v/1.15v... Not...
There is a short between 1v and 1.15v. Time to sand some more.
No video signal. I thought PortablizeMii had a menu pop up without USB... I’ll report back once I troubleshoot the 1v.
Edit: Very weird... 1v is...
Separate names with a comma.