just wondering who I talk to about the store since I ordered an item 3 months ago but got no update on it being produced, shipped etc. so just...
I am using the nand board
where is the 1.8v line
And can anyone recommend affordable heat station
Hello everybody its been a while, finally on break so I decided to finish my portable which does indeed work but is too hideous that I don't wanna...
Well it might be a usb issue since it happened on all the games I have on there
I’ll test out another usb tomorrow and see how it goes from there
Well the good news is that my board did not become a paper weight
I got the new battery holders and my red board works just fine (thank god)
Oh whoops still new so major error on my part
Is there a way for me to wire it to make it right or do I need to get new battery holders
Well now my phone is not dead so here is a pic
Ok guys I have a weird problem that I hope someone has gone through before
Ok so my solder on my batteries doesn’t really stick that well so I...
Ok so I shortened all the wires because they were all over the place and I was able to play one of the best games made for GameCube
(How do I add...
Ok so good news is I got the usb to work
The bad news is that vga still won’t work and I did double check my wires re soldered and...
So reset button is figured out thanks
Does shorting mode to 3.3v mean to directly wire them up or does that mean something else
Do I still need to wire 3.3v to mode?
I was also confused there too
I know I wired h and v sync correctly but maybe it was the rgb
I went to pins 7 9 11 where those not the right ones
For USB it won't show up on the Wii like it gives me the prompt to plug in USB or return to Wii menu
As for vga I was confused about the 3.3v to...
Okay so good news is that the screen can be powered by the red board so there is still hope
The not so good news is that I can't get the USB port...
Yes it's the same when connected to fan
Haven't wired up USB yet so I won't know if there is a change there
I'm gonna try to do that tommorow once...
Don't want the battery to die fast
I mean can I run the screen with the red board and get a good amount of time
Well then scrap that idea for screen
Would it be possible to run them off some li ion batteries
I have an extra set of them and another red board...
After an extremely long time of finally having time off school and getting all the supplies needed (probably need more) I can finally start...
i was wondering if it was possible to wire up a GameCube controller to a teensy so I could use it on a raspberry pi project I'm working on
Separate names with a comma.