Uhm it seems like the hack is wrongly trying to enable VGA patches even if it shouldn't. I will check what's going and release a patch soon.
Uhmmm are you using VGA patches? Or were you using them before?
Oh boy. Are these Chinese or Japanese games?
The mac address is required only by letterbomb. You can simply put all zeros if you only need the usb files
Put a solder join between the two circled pads
Post a picture of the back of the GC+
I have honestly never had either of those issues. Imo both eagle and kicad have their pros and cons, for simple PCBs both are good. It all comes...
Uhm I would like to implement them, but probably not for the first release.
@Pablo_The_Great already made one, but I like your idea as well lol
By deleting the bt.bin file
Perfect, now stop sneezing on your trim :P
No, you have to bridge the pads on the U9 footprint if you remove it and you haven't trimmed yet. You have already trimmed and therefore you don't...
Have you checked that GC controllers work? You might have messed up with the u10 relocation
Dude. Mumble is one of our members who had li-ion exploding on him because he didn't charge them properly.
You are applying a constant voltage....
I am honestly nit sure of what's going on and it's hard to tell. Make sure you get a working portablizemii setup and thrn install the hack
You can run everything you want. Tbh in your case I would simply copy the content of the COPY_TO_USB folder to your drive and run postloader from...
Ah, you are not booting directly in the game, but in nswitch's menu first. The hack doesn't support that because it doesn't emulate the wiimote...
If it's using the stock wiimote it means that you have not replaced kernel.bin with the one from the hack
Uhm thst might be some debugging coming from neek. Try deleting the file font.bin in the sneek folder
Separate names with a comma.