Search results

  1. Benge

    Question PS2 plus controller strange issues

    Thank you ! I will study it little by little, to try to understand everything :) I would answer here if I need help
  2. Benge

    Question PS2 plus controller strange issues

    @CLAUDIO Thank you, yes I had already found this site, it allowed me to understand better how the PS2 controller protocol works. @MRKane Oh, It can be very helpfull if you can find them again, thanks for your help !
  3. Benge

    Question PS2 plus controller strange issues

    Ok, I understand better now ! Thank you very much for this clarification, let's move on to sniff the signal from the PS2 controller. I am going to buy a small USB logic analyzer with 8 channel on AliExpress, it is cheap, and I saw that it was sufficient for i2c bus type. I am not sure if I will...
  4. Benge

    Question PS2 plus controller strange issues

    Ok, thank you for your answers @CLAUDIO an @Gman. So if I understand correctly, it is the games that choose between analog and digital by sending a signal to the controller. And the PS2plus is incompatible with some games because the code is not quite complete So is there a way to modify the...
  5. Benge

    Question PS2 plus controller strange issues

    Hello, I still have this same unrecognized controller's problem. Here are some other issues with other games : Gran turismo 4 : No respond when I move the stick (digital mode), but work with directional cross. Shadow of the colossu : Nothing, no controller not plugged error message, but none of...
  6. Benge

    Worklog PSBlock Rev2

    It look pretty good, with the switch joystick you can go much thinner !
  7. Benge

    Worklog Benge BS2 Portable PS2

    I used standard 0603 smd resistor
  8. Benge

    Worklog First portable: The Wavecube

    Wow it look fantastic <3 ! Very great job ! Can't wait to see it fully assembled
  9. Benge

    Discussion Delidded the Wii CPU and GPU

    Yes obviously, it is not directly in contact with the metal, thermal paste it is use to fill the nano hole in the metal to increase the thermal conductivity.
  10. Benge

    Discussion Delidded the Wii CPU and GPU

    Maybe it is just the air contact with eat ? Can't wait to see if it dissipates better the heat, if it's better than with heat spreaders, I think I'm going to do the same ! Normally it should be better because it removes a thermal resistance because of the old thermal paste which has dried well...
  11. Benge

    BS2

    After months of work, the BS2 is finally finished, here is the result, as well as its functionalities. The goal was to make the portable PS2 as thin as possible, we are 22 mm thick ! Internal Link to the Worklog ...
  12. Benge

    Worklog Benge BS2 Portable PS2

    Thank you Gman ! I want to see that, your portable consoles are awesome, and I think with great video shots that would make them beautiful even more. It is not very difficult I use DIY LED light panel, and I use a Galaxy S9 to shots
  13. Benge

    Worklog Benge BS2 Portable PS2

    The BS2 is complete ! I upload the Youtube video of the construction on my YouTube channel at 18h30 (Paris), 12:10 (Washington). (I have uploaded the English subtitles) I think until now I have passed the challenge of creating the thinnest portable ps2 in the world ! It is only 22 mm thick ...
  14. Benge

    Question PS2 plus controller strange issues

    After testing some other games it work only with Kingdom Hearts, Crash mind over mutant, GTA San Andreas. I have tested God of war in fench first and in english after, but I have the same problem : the controller is not detected. And when I test the controller with the Controller tester (in...
  15. Benge

    Analog2HDMI, AVE-Relocation, microSD-to-USB, and GameCube Controller Breakout...

    The microSD-to-USB Converter look very tiny ! The prices are correct but, unfortunately I am in France and the last time I placed an order in the USA I paid 50% tax ...
  16. Benge

    Worklog DSii

    Can't wait to see another version :D For the BT for audio I plan to use it too I think it can bee really nice ! I did not know that there were circuits which allowed to switch an analog signal, very good to know, I think surely to use some and make a complete PCB with a bluetooth module, that...
  17. Benge

    Question Wii won’t boot

    Have you tested if you have short ? Resistance between each point of Voltage /GND ? Your solder on the U10 look messy, maybe the problem come from here ?
  18. Benge

    Question PS2 plus controller strange issues

    Ok, after a lot of testing ... strugle ... MAJ OPL and FMCB... install all again ... testing some diferents types of games (EU, USA, FR). It look like it don't recognize the controller only when I put game in FR (French), If I put EUR rom in english it work ! I don't know why ? Maybe OPL...
  19. Benge

    Question PS2 plus controller strange issues

    I have tested with 2 - 3 games and I have the same problem, my controller are not recognized. The controller is recognized only with gta san andreas ! I don't know why ? It is wired on the port 1 not on the 2.
  20. Benge

    Worklog Benge BS2 Portable PS2

    I have good news, the sticks work great NOW ! I have tested to found the good value step by step (modifying, upload, test, wait ... loop ...). And here is my values that work great : And to invert the direction I have added a tild here and it work : And here is the RGB LED : Pretty nice in...
Top