Eyoyo Screen auto ON and OFF using Electron Shepherd HDMI - Help!

cfc_12

.
Joined
Apr 28, 2017
Messages
169
Likes
67
Location
Philippines
Portables
11
Need help to fix this

The Component2HDMI and VGA2HDMI from Electron Shepherd actually works

but the problem is, my screen auto turns ON and OFF almost every 3 seconds in an Eyoyo Motherboard as shown in the video.

Do you have any ideas on how to fix this?

Perhaps maybe a resistor, capacitor or etc. and where to solder if you know something about this.

Thanks for the answer! :D

 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
Joined
Feb 5, 2017
Messages
3,773
Likes
2,981
Location
Banana Bender Land, Australia
Portables
6
Going to need to see wiring, or it's impossible to theorise
 

MRKane

.
2021 3rd Place Winner
Joined
Nov 5, 2017
Messages
405
Likes
488
When you do get this going I'm interested to see if the resulting HDMI image is letterboxed like in the other analog to HDMI converters :D
 

cfc_12

.
Joined
Apr 28, 2017
Messages
169
Likes
67
Location
Philippines
Portables
11
Going to need to see wiring, or it's impossible to theorise
The power is connected on the regulator of the PS2 which outputs 5v.

It's connected from the right leg of the regulator to the 5v of the HDMI.

So the total connections are:

* 5v
* RGB from PS2 to RGB/YPbPr of the Electron Shepherd HDMI
* Ground

regulator on left.jpg
analog2hdmi.jpg


In my previous PS2HDMI, it's actually working. Not a single problem encountered.

ps2hdmi.jpg


Since the parcel arrive yesterday, I'm excited to test it and see the difference between a PS2HDMI and a Component2HDMI/VGA2HDMI from Electron Shepherd.

Sadly, the product of Electron Shepherd auto turns on and off the eyoyo screen. Not possible for now for a portable, if this is the final outcome of this.
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
Joined
Feb 5, 2017
Messages
3,773
Likes
2,981
Location
Banana Bender Land, Australia
Portables
6
The power is connected on the regulator of the PS2 which outputs 5v.

It's connected from the right leg of the regulator to the 5v of the HDMI.

So the total connections are:

* 5v
* RGB from PS2 to RGB/YPbPr of the Electron Shepherd HDMI
* Ground

View attachment 25388 View attachment 25389

In my previous PS2HDMI, it's actually working. Not a single problem encountered.

View attachment 25390

Since the parcel arrive yesterday, I'm excited to test it and see the difference between a PS2HDMI and a Component2HDMI/VGA2HDMI from Electron Shepherd.

Sadly, the product of Electron Shepherd auto turns on and off the eyoyo screen. Not possible for now for a portable, if this is the final outcome of this.
Hmmmm. Is your screen also running off the 5v line? It could be that the Component2HDMI is drawing too much power and browning out the 5v line. You could try powering it with a separate 5v reg and see if it does the same thing

Also, I'm confused as to why you're using the Component2HDMI when the Eyoyo accepts component video natively
 

cfc_12

.
Joined
Apr 28, 2017
Messages
169
Likes
67
Location
Philippines
Portables
11
Hmmmm. Is your screen also running off the 5v line? It could be that the Component2HDMI is drawing too much power and browning out the 5v line. You could try powering it with a separate 5v reg and see if it does the same thing
Sadly, since PS2 either Standard Trim or Advanced Trim, there would be no more regulators to get the 5v.

Only in here, since this is the last regulator that outputs 5v

last reg.jpg



Also, I'm confused as to why you're using the Component2HDMI when the Eyoyo accepts component video natively
It's because HDMI is better than Component
 

xsping

.
Joined
Dec 9, 2018
Messages
154
Likes
50
i also have an eyoyo,i want use its ypbpr to connect wii,the hdmi and vga is good ,but ypbpr is strange and not clear,i think it is the problem of sharpness,but no place to change it ???
 

cfc_12

.
Joined
Apr 28, 2017
Messages
169
Likes
67
Location
Philippines
Portables
11
i also have an eyoyo,i want use its ypbpr to connect wii,the hdmi and vga is good ,but ypbpr is strange and not clear,i think it is the problem of sharpness,but no place to change it ???
save.jpg
 

cfc_12

.
Joined
Apr 28, 2017
Messages
169
Likes
67
Location
Philippines
Portables
11
I've seen others used only 12 out of 19 pins on PS2HDMI

Can you guys tell me what are the 7 pins that I could disregard on PS2HDMI?

 

ABH

.
Joined
Oct 19, 2016
Messages
31
Likes
65
Try to change the game resolution
from GSM settings
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
Joined
Feb 5, 2017
Messages
3,773
Likes
2,981
Location
Banana Bender Land, Australia
Portables
6
I've seen others used only 12 out of 19 pins on PS2HDMI

Can you guys tell me what are the 7 pins that I could disregard on PS2HDMI?

You can't really disregard any if you want it to work properly. You could drop the shield lines and HEAC, but it's not really worth it
 
Top