Stephano
.
- Joined
- Apr 8, 2019
- Messages
- 36
- Likes
- 3
So before I accidently set this thing into flames, It would be great if y'all could quickly look over the board and my wiring just to make sure everything should be ready to go.
Some notes:
U10 SHOULD be wired correctly. The wire keeps breaking off and I have to keep resoldering it.
Blue = 3.3V
Red = 1.15
Cyan = 1V
Black = Ground
Yellow = Video
Audio is not hooked up (because someone moved my stuff and broke off those very delicate wires -_- )
A ground wire is hooked up to the ground on the video connector.
I have to connect the yellow wire to the video cable by hand because the two won't solder together. I hope that doesn't cause any issues.
Only the video will be hooked up to the TV
Bluetooth isn't connected. I'm just testing to see if the Portablize me menu shows up.
USB is not hooked up.
I think that is it, but I do have one more important thing to ask. I am able to set a current limit on my power source. What should I set the limit to on all 3 voltages/
Edit: I made a mistake, the yellow wire above is actually a ground wire for the video. The yellow wire is not connected because it won't solder on.
Some notes:
U10 SHOULD be wired correctly. The wire keeps breaking off and I have to keep resoldering it.
Blue = 3.3V
Red = 1.15
Cyan = 1V
Black = Ground
Yellow = Video
Audio is not hooked up (because someone moved my stuff and broke off those very delicate wires -_- )
A ground wire is hooked up to the ground on the video connector.
I have to connect the yellow wire to the video cable by hand because the two won't solder together. I hope that doesn't cause any issues.
Only the video will be hooked up to the TV
Bluetooth isn't connected. I'm just testing to see if the Portablize me menu shows up.
USB is not hooked up.
I think that is it, but I do have one more important thing to ask. I am able to set a current limit on my power source. What should I set the limit to on all 3 voltages/
Edit: I made a mistake, the yellow wire above is actually a ground wire for the video. The yellow wire is not connected because it won't solder on.
Last edited: