Recent content by potato__portable

Alot has happened since last post. I got my case and soldered the pms lite and the pms pd. I wired up the battery contacts and then soldered them to b+ and b-. I soldered in the fan as well and it was working fine. The next day i was showing my little sister, but instead of it turning on the 2R2...

Update: I let the solder on the 1v lines flow for a bit longer and checked the resistances again. Luckily the resistance went from 8 oms on Wednesday to 40 oms today. I got lucky there hopefully my board is fine for now Also my dad bought me some joystick boxes and the 21700 batteries and my...

I’m pretty sure for the bluetooth traces, scratching the board is to just get rid of the soldermask so you can solder directly to the traces.

yeah i meant 0.1mm wire sorry lol

1mm wire should work to my knowledge.

I trimmed my Wii and got my resistances, however when looking at the 1v resistance, it seems to be very low. I think this is due to applying too much heat when soldering my rvl ntc. Even though the resistance is very low, should the ntc still be able to run?

Look at the bottom of the board. It tells you what pin is what.

Got a new 128 to usb along with 28 and 38 awg wire and also a wire stripper (obviously for the 28 awg wire). I’m going to start testing everything and wiring up the wii.

There is a guide on Youtube that shows how to relocate the bluetooth module, just skip to the bluetooth relocation part.

Yeah. sometimes it takes a while to restock. Also the diagrams for the 4layer boards are on the 4layertech website.

If you can’t find any portables to buy, I definitely recommend building the Ashida. It’s incredibly friendly to beginners like me and I’m now currently building one. Here’s the link to the Ashida if you want to take further look into it...

When i plug in my USB rvloader doesn't show up in home-brew channel . Why is this happening? Edit: I fixed the problem.

Homebrew Channel is not detecting RVLoader from my Sandisk Cruzer Blade. Is there anyway to fix this?

The Ashida doesn’t use 18650 lithium batteries, they use 21700 lithium batteries.

I double checked them and they are fine and aren’t touching :) EDIT: This may be a silly question, but do i have to desolder these connectors from the driver board?