goosewerks's latest activity
-
Atari Jaguar Console Contains: Atari Jaguar Top Shell Atari Jaguar Bottom Shell Specs: These are extremely high poly scans... -
I plan on open sourcing this board design for others to attempt once complete and confirmed fully functional, so you could design...
-
goosewerks reacted to Wesk's post in the thread Model Dreamcast Controller Front Printable STL with
Like.
Enjoy a cleaned and modified version of my Dreamcast controller front piece scan ready for 3D printing. Download here: GDrive Link -
goosewerks reacted to Stitches's post in the thread Model G-Boy Rev4U Faceplate Mod - Famicom Boy edition with Like.
So @supertazon made a super sick Famicom G-Boy a while ago, and when I got my Bambu A1 I knew exactly what I needed to do with it! With...
-
Sega Nomad 3D Scan These are the RAW scans, for the cleaned model see here: 3D printable Nomad Shell Contains: Sega Nomad Front...
-
Here lies my version of a 3D printable Nomad shell. Files contain both the front and the back as well as a dual speaker version...
-
It's been a long ride building this Gboy but I am so thrilled to have finally finished it! My goal with this build is to aim for a...
-
goosewerks reacted to Bayou's post in the thread Worklog The first attempt at creating a portable Wii with the appearance of GB. with Like.
After an extended period of studying relevant knowledge here, I decided to proceed with the OMGWTF trim, and it was successful! However...
-
goosewerks reacted to groseil's post in the thread Worklog The O-Wii, my first portable Wii with Like.
Hello, 3 years ago I came across one of Benge's videos where he made the O-Wii. I then became interested in creating my own portable Wii...
-
goosewerks reacted to groseil's post in the thread Worklog The O-Wii, my first portable Wii with Like.
here are my failures.....
-
goosewerks reacted to JOSHTIME's post in the thread Worklog Windows PC stick inside Gameboy shell with Like.
Alright, here's the model. I expect to let the individual components float around the top of the rear case. I will most likely use some...
-
Yes, all will be open sourced eventually and on GitHub so you can see the details when I’ve finished the model. Just need to make a few...