Worklog Portable J4125

Joined
Sep 1, 2018
Messages
86
Likes
147
Location
Brazil
PC Stick T6 PRO
  • Celeron J4125 2.00 GHz
  • Intel HD 600
  • 6G RAM DDR4
  • 128 Emm
  • LCD 7" 1024x600 IPS (Custom Firmware) with touch screen
Battery: Samsung EB-P1100CSPG - Approximate runtime of 4h running Crysis 1 (not remaster)
BMS: Sw6106
Generic Joycon Bluetooth running with a custom BetterJoy

1626532244595.jpg
1626911600691.jpg

1626912605843.jpg


 
Last edited:
Joined
Sep 1, 2018
Messages
86
Likes
147
Location
Brazil
Wanna give us some info?
Hello Wesk, I've finished including the initial information.
I have about 3 projects half stopped, because I have serious vision problems B|. I believe this one ends before the others
 

Dmcke5

.
2020 1st Place Winner
Joined
Feb 16, 2020
Messages
216
Likes
883
Location
Queensland, Australia
Portables
3
Nice. I'm keen to see some more pictures of the back of it. Is it running from its own power yet?
If you get a chance, can you get some pictures of windows running at 1024x600 for me? I'm planning another windows build in the not too distant future with a screen of that resolution but I am concerned about the usability of windows at such a low resolution.
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
Joined
Feb 5, 2017
Messages
3,773
Likes
2,981
Location
Banana Bender Land, Australia
Portables
6

Dmcke5

.
2020 1st Place Winner
Joined
Feb 16, 2020
Messages
216
Likes
883
Location
Queensland, Australia
Portables
3
Yooo that looks sick! How do modern games run on it?
Just search YouTube for "J4125 gaming" and you'll get a reasonable idea of what it can run. I suppose it depends on what you consider modern too. It'll handle Amoung us just fine but I doubt it would even load into cyberpunk lol.
 
Joined
Sep 1, 2018
Messages
86
Likes
147
Location
Brazil
Nice. I'm keen to see some more pictures of the back of it. Is it running from its own power yet?
If you get a chance, can you get some pictures of windows running at 1024x600 for me? I'm planning another windows build in the not too distant future with a screen of that resolution but I am concerned about the usability of windows at such a low resolution.
I haven't finished the back cover yet, but the videos are already running from the celeron j4125.
 
Joined
Dec 6, 2020
Messages
226
Likes
260
Location
Canada
Portables
3
Nice. I'm keen to see some more pictures of the back of it. Is it running from its own power yet?
If you get a chance, can you get some pictures of windows running at 1024x600 for me? I'm planning another windows build in the not too distant future with a screen of that resolution but I am concerned about the usability of windows at such a low resolution.
Not sure where you're located so sourcing this may not be amazing but there is a 7" 1280*800 IPS panel floating around 30pin lvds # HSD070PWW1-B01 I did see just the panel on AliExpress, but Robotshop.com did have it with a driver board, and a voltage modifiable board too

7" IPS 1280*800
 

Dmcke5

.
2020 1st Place Winner
Joined
Feb 16, 2020
Messages
216
Likes
883
Location
Queensland, Australia
Portables
3
Not sure where you're located so sourcing this may not be amazing but there is a 7" 1280*800 IPS panel floating around 30pin lvds # HSD070PWW1-B01 I did see just the panel on AliExpress, but Robotshop.com did have it with a driver board, and a voltage modifiable board too

7" IPS 1280*800
I'm not going to have room for a dedicated display driver board so whatever display I choose will have to be driven by an open source display controller that I can integrate into my PCB. The 1024x600 displays are still TTL which means I can use the TFP401 DVI encoder design that adafruit makes (and the thankfully provides schematics for). Anyway, I'll start my own thread once things are properly under way. Don't want to clog up someone else's post!
 
Top