Worklog NintenDoom64: AV&LED Modded/Custom Painted N64

nobble

.
Joined
Apr 30, 2017
Messages
170
Likes
268
Time for some wax sessions and low-light dining. Here's a nightly mod that @Postman and I are working on.

It's a Nintendo 64 with a custom splatter paint that I did from back in the Nobble64p era. We are adding a few LEDs to illuminate the badge, standard RCA ports, and HDMI(probably).

IMG_20180520_015659_302.jpg


 

Attachments

Postman

Modspeed
.
The Postman
Joined
Apr 15, 2018
Messages
48
Likes
80
DANK.gif


NINTENDOOM_UPDATE.jpg

Smol update time!

Wired up an AV2HDMI that we got at Micro center and reused the RCA input from the AV2HDMI as composite output.

Still to do:
- Laser cut custom N64 badge for the front of the console
- HDMI mounting bracket
- Custom controllers
 

nobble

.
Joined
Apr 30, 2017
Messages
170
Likes
268
Postman has left to deliver more mail, so I continue to work on custom n64 logo.
nintendoom64edit.png
 

Postman

Modspeed
.
The Postman
Joined
Apr 15, 2018
Messages
48
Likes
80
Another update! Got the custom N64 badges created using the laser cutter an my work. The cool thing about it is that the cutter will actually cut in 3D by mapping colors to specific values of depth. Neat stuff!

IMG_20180529_191613.jpg IMG_20180529_190646.jpg IMG_20180529_190630.jpg IMG_20180529_190622.jpg IMG_20180529_190323.jpg IMG_20180529_191628.jpg
 

nobble

.
Joined
Apr 30, 2017
Messages
170
Likes
268
The cool thing about it is that the cutter will actually cut in 3D by mapping colors to specific values of depth. Neat stuff!
Neat stuff indeed. I didn't even know that. I may have to experiment with this now.
 

Doom

Modelrater
.
.
.
Estmemed Member
Joined
Feb 17, 2016
Messages
662
Likes
1,508
Portables
Always 1/2

Postman

Modspeed
.
The Postman
Joined
Apr 15, 2018
Messages
48
Likes
80
I need the ones with the logo thank
Ask and you shall receive... In the mail. If you want one I'd be more than happy to send ya one! Just DM me on discord.
 

nobble

.
Joined
Apr 30, 2017
Messages
170
Likes
268
IMG_20180630_044140.jpg

Slow and steady slays the demon!

Currently finishing up epoxying LEDs and adding extra buttons to the Demon Gunn controller.

Now if we can get this CNT-NUS chip working properly we will be in business.
 

nobble

.
Joined
Apr 30, 2017
Messages
170
Likes
268

@Postman and I successfully got the Demon Gunn modded into a full fledged Doom64 controller! The NintenDOOM64 registers a working gamepad and memory card. Once we get it fully together, I will post some nice memes. For now, I'll keep posting teasers on Instaspam.
 

nobble

.
Joined
Apr 30, 2017
Messages
170
Likes
268

Almost finished with the second custom controller for this console. This way you can still experience the original gameplay of DOOM64. @Madmorda sent me the custom hand-molded transluciferent red buttons for this one. They turned out great! Thanks again for sending these!!!

The buttons and pentagram will light up red. Also planning on adding accent lights inside the case of the NintenDOOM64. It's getting a few more modifications and then it should be ready to close up.
 

nobble

.
Joined
Apr 30, 2017
Messages
170
Likes
268

We have a fully working N64 Demon Gunn w/ hardwired memory card! It is all closed up and almost playable with one hand through my phone camera.
 

Nold

real emulation, no hardware
Staff member
.
.
2021 1st Place Winner
Joined
Jul 16, 2017
Messages
443
Likes
1,608
Location
EU
Portables
5 + 1*π
no_insta_for_nold.png


lmao - looking crazy tho
 

nobble

.
Joined
Apr 30, 2017
Messages
170
Likes
268
Crazy bro! So clean.

Look me up on Instagram nobble64. I'll also post a video when all is finished.
 
Top