Miceeno's Purple G-Boy

Aurelio

ᕕ( ᐛ )ᕗ
Staff member
.
.
.
.
.
Joined
Mar 3, 2016
Messages
2,219
Likes
2,937
Portables
2
Very nice wiring. Though, you forgot to peel off the protective plastic film from the copper plate. You should remove it to avoid overheat
 

Miceeno

.
2020 3rd Place Winner
Joined
Nov 30, 2016
Messages
153
Likes
281
Portables
6
I pealed a blue film off of both sides. Is there more? I scratched at the surface with a razor blade because I thought the same thing. I think the surface is etched where the air bubbles were.
 

Aurelio

ᕕ( ᐛ )ᕗ
Staff member
.
.
.
.
.
Joined
Mar 3, 2016
Messages
2,219
Likes
2,937
Portables
2
I pealed a blue film off of both sides. Is there more? I scratched at the surface with a razor blade because I thought the same thing. I think the surface is etched where the air bubbles were.
Ah nevermind then, it looked like air bubbles from the picture.
 

Miceeno

.
2020 3rd Place Winner
Joined
Nov 30, 2016
Messages
153
Likes
281
Portables
6
I appreciate it Aurelio. I'd hate to kill this over something so simple.

The guide wasn't clear on what thermal interface material is to be used. I used some Noctua NT-H1 I had lying around. Was I supposed to reuse the old thermal pads?
 
Top