- Joined
- Dec 10, 2016
- Messages
- 578
- Likes
- 663
- Location
- Constant Fear
- Portables
- sin^2(x) + cos^2(x) +e^(i*pi)
So in my Squiifer thread, I released a board for dslite rubber pads, it cut greatly on the side compared to using regular buttons. more people than I thought I would were using it. and asking for stuff on it I sadly lost when my laptop died. So I quickly whipped up a new one, and decided to release it.
The arrows show what direction the buttons are, there's "reference" to show you which way the board should be oriented.
Here is the oshpark link
https://oshpark.com/shared_projects/wgKz8oJF
Here's the Board file
and here's the 3d model, it's a .Stl
There is a Fusion file for it, but to keep file size down I'm just gonna leave it, unless people really want it.
edit, If you think I should fix something, or have any suggestions, or questions, ask them and I'll try to give them
These are untested, but they are based off my older drawings, so they should work, if they don't, let me know and I'll fix them. I'm a little short for money,
The arrows show what direction the buttons are, there's "reference" to show you which way the board should be oriented.
Here is the oshpark link
https://oshpark.com/shared_projects/wgKz8oJF
Here's the Board file
and here's the 3d model, it's a .Stl
There is a Fusion file for it, but to keep file size down I'm just gonna leave it, unless people really want it.
edit, If you think I should fix something, or have any suggestions, or questions, ask them and I'll try to give them